APPLICATION OF OBJECTIVE MATRIX (OMAX) METHOD FOR MEASURING PRODUCTIVITY OF PROL TAPE PROCESSING IN UD PURNAMA JATI

Authors

DOI:

https://doi.org/10.21776/ub.jpa.2021.009.01.1

Keywords:

Diagram Ishikawa, OMAX, Productivity, Prol Tape, Traffic Light System

Abstract

The main motivation of this research is to see the level of productivity in prol tape production division of UD. Purnama Jati. in order to increase the prol tape productivity with the Objective Matrix (OMAX) method. The research also performed by evaluating the worst performance ratio with the Traffic Light System. The result shows that the measurement period in June 2019 with a productivity index value of 118% being the highest productivity index value. Meanwhile, the lowest productivity occurred in the period of July 2019 with a productivity index of (−47.89%). Based on the evaluation results of utilizing the Traffic Light System technique, the ratio at the level of "CRITICAL" was a ratio of 1 that is the ratio of productivity of raw materials. UD. Purnama Jati requires to focus on the variables that cause a decline in productivity and can be improved according to the proposed improvements.

Author Biographies

Dhanang Eka Putra, Politeknik Negeri Jember

Department of Agrobusiness Management

Khanifatul Maula Mursid, Politeknik Negeri Jember

Department of Agrobusiness Management

References

Afifi, A., Tuningrat, I. A. M., & Satriawan, I. K. (2015). Analisis Produktivitas Produksi Di Perusahaan Kecap Manalagi Denpasar. Jurnal Rekayasa Dan Manajemen Agroindustri, 3(3), 133–142.

Avianda, D., Yuniati, Y., & Yuniar, Y. (2014). Strategi Peningkatan Produktivitas di Lantai Produksi Menggunakan Metode Objective Matrix. Jurnal Online Institut Teknologi Nasional, 1(4), 202–213.

Bintang, M. (2005). Analisis Faktor-faktor yang Berpengaruh terhadap Performansi Karyawan (Studi Kasus: PKS. PTPN-II Sawit Seberang). Jurnal Sistem Teknik Industri, 6(3), 13–14.

Hamidah, N. H., Deoranto, P., & Astuti, R. (2013). Analisis Produktivitas Mengguakan Metode Objective Matrix (OMAX): Studi Kasus pada Bagian Produsi Sari Roti PT Nippon Indosari Corpindo, Tbk Pasuruan. Jurnal Teknologi Pertanian, 14(3), 215–222.

Lestari, D. P., & Susanto, W. H. (2015). Pembuatan Getuk Pisang Raja Nangka (Musa Paradisiaca) Terfermentasi dengan Kajian Konsentrasi Ragi Tape Singkong dan Lama Terfermentasi. Jurnal Pangan Dan Agroindustri, 3(1), 23–31.

Nasution, A. H. (2006). Manajemen Industri. Yogyakarta: Penerbit Andi.

Prapti, K. P., Iskandar, R., & Kasutjianingati, -. (2016). Strategi Peningkatan Kinerja Supply Chain Buah Naga di Kecamatan Bangorejo Kabupaten Banyuwangi Berdasarkan Proses Inti SCOR. Jurnal Ilmiah Inovasi, 15(3), 94–98. https://doi.org/10.25047/jii.v15i3.19

Putri, S. W. A., & Hersoelistyorini, W. (2012). Kajian Kadar Protein, Serat, HCN, dan Sifat Organoleptik Prol Tape Singkong dengan Subtitusi Tape Kulit Singkong. Jurnal Pangan Dan Gizi, 3(6), 17–27.

Thaufiq, M. R. I., Astuti, R., & Deoranto, P. (2014). Analisis Produktivitas Bagian Pengolahan Susu Pasteurisasi Menggunakan Metode Objective Matrix (OMAX) (Studi Kasus Koperasi SAE Pujon). Thesis. Universitas Brawijaya.

Vincent, G. (1998). Manajemen Produktivitas Total: Strategi Peningkatan Produktivitas Bisnis Global. Jakarta: PT Gramedia Pustaka Utama.

Downloads

Published

30-01-2021

How to Cite

Putra, D. E., & Mursid, K. M. (2021). APPLICATION OF OBJECTIVE MATRIX (OMAX) METHOD FOR MEASURING PRODUCTIVITY OF PROL TAPE PROCESSING IN UD PURNAMA JATI. Jurnal Pangan Dan Agroindustri, 9(1), 1–12. https://doi.org/10.21776/ub.jpa.2021.009.01.1

Issue

Section

Articles